This document is the 1300 SaniTite HP Standard Details. Various diagrams of installation, manhole connections, Inserta Tee and pipes shown.

The following is a list of the products and process details featured in the diagrams.

SaniTite HP Trench Installation Detail.

Alternate Pre-Cast Manhole Connection with SaniTite HP Pipe.

Compression (Cast-In) Resilient Structure Connection 12”-30” Dual Wall SaniTite HP w/Sleeve or Nyloplast PVC MH Adapter.

Compression (Cast-In) Resilient Structure Connection 30”-60” Triple Wall SaniTite HP.

12”-24” SaniTite HP Outside Drop Manhole.

30”-60” SaniTite HP Outside Drop Manhole.

Inserta Tee installation.

Access MH Detail with SaniTite Pipe.

Booted (Cored or Cast Hole) Resilient Structure Connection 12”-30” Dual Wall SaniTite HP w/Sleeve or Nyloplast PVC MH Adapter.

Booted (Cast-In) Resilient Structure Connection 12”-30” Dual Wall SaniTite HP w/Sleeve or Nyloplast PVC MH Adapter.

Booted (Cored or Cast Hole) Resilient Structure Connection 30”-60” Triple Wall SaniTite HP.

A section on post installation testing states that when deflection testing for allowable deflection limits, the minimum specified inside diameter should be used when establishing mandrel sizing. Table 1 SaniTite HP recommended Mandrel Settings and Table 2, Time for Pressure Drop for SaniTite HP are provided.

For Leakage testing, SaniTite HP may be tested with ASTM F1417.